Yamaha DM 2000 Owner's Manual page 297

DELAY->REV
One input, two output delay and reverb effects in series.
Parameter Range
DELAY L
0.0–1000.0 ms
DELAY R
0.0–1000.0 ms
FB. DLY
0.0–1000.0 ms
FB. GAIN
–99 to +99%
DELAY HI
0.1–1.0
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
DLY BAL
0–100%
INI. DLY
0.0–500.0 ms
REV TIME
0.3–99.0 s
REV HI
0.1–1.0
DIFF.
0–10
DENSITY
0–100%
SYNC
OFF/ON
NOTE L 1
NOTE R
*1
NOTE FB
*1
1.
tempo setting)
Effects Parameters
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
Delay high-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and delayed reverb balance (0% = all delayed reverb,
100% = all delay)
Initial delay before reverb begins
Reverb time
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel
DELAY L
Used in conjunction with TEMPO to determine right chan-
nel DELAY R
Used in conjunction with TEMPO to determine FB. DLY
(Maximum value depends on the
283
DM2000—Owner's Manual