Miele TX3587 Operating And Installation Instructions page 74

Problem solving guide
Problem
F73 or
Check the brew unit
74
Cause and remedy
The brew unit cannot be positioned correctly, or it is
dirty and the ground coffee cannot be processed.
 Check whether you can remove the brew unit (see
"Cleaning and care - Brew unit").
 Remove and clean the brew unit (see "Cleaning
and care – Brew unit").
 Push the coffee ejector of the brew unit into the
correct position (see illustration).
 Push the waste container and the water container
back in the machine. Do not insert the brew unit.
Close the front and switch the machine on with
the On/Off sensor .
This will initialise the brew unit motor and put it back
into the start position.
 When
Insert the brew unit
open the front and replace all the parts back in the
machine. Close the front.
If the brew unit cannot be removed:
 Switch the machine off with the On/Off sensor .
Wait for approx. 2 minutes before switching it
back on again.
appears in the display,