A - 6
ET1 Enterprise Tablet Integrator Guide
Connector Pin-outs
I/O Connector Pin-Outs
I/O Connector
Figure A-2
External Connector Pin-Outs
Table A-4
Pin
Signal Name
1
Cradle Detect
2
USB_ID
3
External Power IN
4
USB_VBUS
5
USB_D-
6
USB_D+
7
Ground
HDMI Connector Pin-outs
HDMI Connector
Figure A-3
Pin 1
Tie to ground to indicate cradle insertion. Otherwise leave unconnected.
Tie to ground for Host mode. Leave unconnected for Client mode.
+12.0 VDC, +/- 5%, 20W
Host mode output = +5.0 VDC, 500mA max.
Client mode Vbus input = +5.0 VDC
USB Data Negative. High speed USB (480 Mbps) in both host and client
modes. Also supports Full speed USB (12 Mbps) in both host and client
modes.
USB Data Positive. High speed USB (480 Mbps) in both host and client
modes. Also supports Full speed USB (12 Mbps) in both host and client
modes.
Ground for all charging and USB communication.
Pin 1
Description