Philips Norelco S7720 User Manual page 20

ENGLISH
38
C
5 Hold the shaving head holder in your hand
1
and place the retaining ring on the shaving
2
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
6 Repeat this process for the other two
cutters and combs.
7 Reattach the shaving head holder to the
bottom part of the shaving unit.
C
8 To reset the shaver, press and hold the On/
Off button for approximately 7 seconds.
7 sec.
Replacing the SmartClean System
Cleaning Cartridge
C
◗ For optimal cleaning results, replace the
cleaning cartridge when the replacement
indicator blinks orange or every 3 months.
C
1 While holding the SmartClean System
with one hand, press the cartridge release
2
button on the side of the SmartClean
1
System (1) and lift the SmartClean System
(2).
C
2 Remove the empty cleaning cartridge and
pour any remaining cleaning fluid out of
the cleaning cartridge.
You can safely pour the cleaning fluid down the
sink.
3 Discard the empty cleaning cartridge.
Contact your local town or city officials for
recycling information.
4 Remove the seal off the new cleaning
cartridge.
C
5 Place the new cleaning cartridge in the
SmartClean System.
C
6 While holding the SmartClean System with
one hand, gently push the top part of the
SmartClean System back down. You will
hear a 'click'.
When the SmartClean System is ready for use,
do not move appliance to prevent leakage.
This shaver/SmartClean System has no other
user-serviceable parts. For assistance, call
1-800-243-3050.
ENGLISH
39