Remote Software Update; Remote Operation Mode; Activating Remote Administration - Siemens HiPath 1100 Programming Manual

Step by step
qmhei
dlh
e
djj
q
p
Enter the number for technical support.
r
Confirm.
w
Wait for a confirmation tone.

Remote software update

If authorized, the software can be update remotely.
Enter this code.
w
Wait for a confirmation tone.
The software is sent by the service center.

Remote operation mode

This specifies the remote updating of the software. An
update can be carried out remotely over external digital
ISDN lines and analog lines via modem.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
f
or Select the operating mode:
e
= Via ISDN (default)
f
= Via modem
w
Initial status for programming mode.

Activating remote administration

This setting allows the system to be administered re-
motely.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/deactivate remote administration:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.
General settings
117