Installing the Card Holder
The KX-T7425 is equipped with a card holder with memory station card.
Follow the instructions below to install the card holder to the unit.
1
Place the card holder edges so that
they can be inserted under the
slide rails on the unit.
2
While pushing on the areas
marked "PUSH", insert the edges
of the holder under the slide rails
and then slide in the direction of
arrow
.
A
Remove the card holder:
Push the card holder in the direction
of arrow
. Then, while pressing on
B
the tab, pull the top of the holder in
the direction of arrow
28
.
C
A
C
B