Connecting to an Internet Service
Provider
Once you have established an account with an Internet Service
Provider (ISP) and gathered the necessary configuration information,
you are ready to create a connection on your MobilePro for your ISP
account.
Follow these steps to create a new connection for your ISP account.
Tap Start, Programs, Communication, then select Remote
1.
Networking.
2.
Double tap the Make a New Connection icon.
Enter a name for the new connection.
3.
Select Dial-Up Connection as the connection type and tap Next.
4.
Use the drop-down box to select Internal Modem on COM 4 and
5.
tap Configure.
Select the required port settings and call options. Tap OK.
6.
Tap TCP/IP Settings and configure the required General Settings
7.
and Name Servers. Tap OK.
8.
Tap Next and enter the required dial-up telephone number. Tap
Finish.
Once your ISP connection is established, you can configure your
MobilePro to send and receive e-mail through your ISP. Follow the
instructions in "Sending and Receiving E-mail" and "Activating a
Connection," later in this chapter, to send and receive e-mail through
your ISP.
For ISP settings, access: http://www.cewindows.net/wce/isp.htm/.
Although not an official NEC web site, this site contains important
information about ISP settings.
5-4 Setting Up a Remote Connection