Input Boards
BKDM-3020
BKDM-3021
BKDM-3022
BKDM-3023
BKDM-7020
DME-3000/7000 • Product Guide
This section describes the optional input boards that can be added to a DME-3000
or DME-7000 system. Please note:
•
Each input board is compatible with both systems.
•
One input board is required for proper DME operation.
•
Only one input board can be installed in the selected processor at a
time. However, multiple input boards can be purchased.
Digital Composite Input/Output Board
The BKDM-3020 Digital Composite (4fsc) Input/Output Board provides two (A
and B) composite serial digital inputs and two composite serial digital outputs.
Digital Component Input/Output Board
The BKDM-3021 Digital Component (4:2:2) Input/Output Board provides two (A
and B) component serial digital inputs and two component serial digital outputs.
Digital/Analog Composite Input/Output Board
The BKDM-3022 Digital (4fsc) and Analog Composite Input/Output Board
provides two (A and B) composite serial digital inputs, two (A and B) composite
analog inputs, two composite serial digital outputs, and two composite analog
outputs.
Digital/Analog Component Input/Output Board
The BKDM-3023 Digital (4:2:2) and Analog Component Input/Output Board
provides two (A and B) component serial digital inputs, two (A and B) component
analog inputs, two component serial digital outputs, and two component analog
outputs.
Digital Input/Output Board
The BKDM-7020 Digital Input/Output Board provides two (A and B) serial digital
inputs for video and key signals, plus a single external video input. The board can
be used for Composite (4fsc) or Component (4:2:2) signals, with all configuration
performed from the GUI. An assignable frame store on the board itself can capture
input or output images for use as a background.
SONY
Configuration Guide • • 25