product introduction
Rear Panel
2
1
Tamper Switch
2
Fixing Screw
3
6-PIN Connector
4
8-PIN Connector
5
2-PIN Connector
6
RJ45 Connector
7
DIP Switch
8_
product introduction
3
Tamper switch.
Tamper switch.
Hole for a fi xing screw.
Can be connected to the Wiegand input and RS-485 communication cables.
Can be connected to the Wiegand output and signal output cables.
Can be connected to the power cable.
Used in TCP/IP communications.
Used to initialize the system or specify the communication addresses.
4
5
6
7