Using The Configuration Page; Home > Wizard - D-Link DPH-300 User Manual

Using the Configuration Page

Using the Configuration Page
Whenever you want to configure your DPH-300, you can access the Configuration
Menu by opening the web-browser and typing in the IP Address assigned to the
DPH-300. The DPH-300 has DHCP enabled by default, so its IP Address will be
that assigned by the DHCP server on your LAN. This DHCP server is often
contained in a multi-port Ethernet router. See your router's documentation to
determine the addresses assigned by its DHCP server. If you do not know the IP
address assigned to the DPH-300 (or you do not yet have a multi-port Ethernet
router) you can connect to the DPH-300 by the following method:
• Connect the WAN port on the DPH-300 directly to the Ethernet port on your
PC.
• Set your PC to have a static IP address of 10.1.1.2 with a subnet mask of
255.0.0.0 and a default gateway of 10.1.1.1
• Switch the DPH-300 on
• Open the web browser on your PC
• Type in the IP Address of the DPH-300 (http://10.1.1.1)
• Type admin in the User Name field
• Type admin in the Password field
• Click OK
The Home > Wizard screen will appear. Please refer to the Quick Installation
Guide for more information regarding the Setup Wizard.
D-Link Corporation
DPH-300 User's Manual
http://10.1.1.1
or the IP
address
assigned by
your LAN's
DHCP server
49