Motorola 2.1 Networking Setup Manual page 31

Chapter 2: Network Setup
When the Network Configuration screen is displayed, click on the Edit button. Uncheck
14
Configure using DHCP. Input the following;
IP Address: 172.31.0.20
Netmask: 255.255.0.0
Click on the OK button.
Input the remaining network data.
15
Host Name: WMS
Gateway: 172.31.0.2
Primary DNS: 172.31.0.20
Click on the Next button.
It is suggested that you select the No Firewall option when the Firewall Configuration screen
16
is displayed. Click on the Next button.
Selecting another option may impact the function of network services, including
WMS.
On the same page, make sure SE Linux is set to disable.
When the Additional Language Support screen is displayed, select any additional language
17
options required. Click on the Next button.
When the Time Zone Selection screen is displayed, select the appropriate settings for your
18
geographic location. Click on the Next button.
When the Set Root Password screen is displayed, input your root password. The reference
19
design default is g0ld11. Input and confirm the password. Click on the Next button.
At the Package Installation Defaults screen, select Customize the set of packages to be
20
installed. Click on the Next button.
You may now choose the packages to be installed. In addition to the defaults, you must
21
choose the following to satisfy prerequisites for the One Point Wireless Manager™ application:
- KDE Desktop Environment (To Make KDE your default Desktop Environment unselect
"GNOME Desktop Environment" package, or it will be automatically selected)
- Editors
- Graphical interface – Only Firefox
- DNS Name Server
- Network Servers
You may choose any desired packages as well as a preferred window manager at this time.
Click on the Next button when you are satisfied with the package selection.
The installer is now ready to copy files to the server. Click on the Next button to continue. The
22
installer will format and copy files to the hard drive. This process will take several minutes. You
will be prompted for additional discs.
When the Congratulations screen is displayed, the Red Hat Enterprise Linux ES installation is
23
complete. Remove any install media and click on the Reboot button.
2-17