Toshiba e-STUDIO200L Service Manual page 237
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO200L:
- Service handbook (762 pages) ,
- Service manual (708 pages) ,
- Operator's manual (102 pages)
Table of Contents
Advertisement
[W] Registration roller
(1)
Take off the front cover
(
P.2-30 "[A] Front cover").
(2)
Take off the process unit
(
P.11-8 "[A] Process unit").
(3)
Take off the ADU
(
P.15-10 "[A] Automatic Duplexing Unit
(ADU)").
(4)
Take off the bypass unit
(
P.9-17 "[G] Bypass unit").
(5)
Take off the transfer unit
(
P.11-17 "[O] Transfer unit").
(6)
Take off the SYS board case
(
P.2-46 "[D] SYS board case").
(7)
Take off the connecting port cover
(
P.2-37 "[O] Connecting port cover").
(8)
Take off the main motor drive unit
(
P.10-5 "[B] Main motor drive unit").
(9)
Take off the registration roller clutch
(
P.9-25 "[S] Registration roller clutch").
(10) Remove 2 screws and take off the terminal
holder.
(11) Release the latch and knob.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Terminal holder
Fig. 9-60
Fig. 9-61
e-STUDIO200L/202L/203L/230/232/233/280/282/283
9 - 31
Knob
PAPER FEEDING SYSTEM
9
Hide quick links:
Advertisement
Table of Contents
