Advertisement
5 Disassembly and Assembly Instructions
Component dismantling
1. As a safety precaution, always disconnect hydraulic and electrical connections before servicing. Failure to observe these
safety rules may result in damage to people and/or property.
2. To avoid the danger of electrical surges you must disconnect the appliances from the mains by pulling out the plug or depress-
ing the corresponding magnetothermic switch on the electrical service panel.
3. The notes below show you how to disassemble the main components, follow the procedure in reverse order to reassemble.
4. The paragraphs below were written according to the following [philosophy]: the operations required for accessing the compo-
nents located inside / in the lower part of the appliance are described first; various paragraphs then describe the operations
required for replacing the individual components.
5.1.
Dismantling
cover
1. Remove the 2 screws on top.
2. The 6 screws back.
the
protective
3. Remove the cover.
5.2.
Dismantling the sides
1. Remove the 6 screws back cover.
15
Hide quick links:
Advertisement
