6.6.3 VLAN-Enabling a Group
There are two ways to VLAN enable a group:
When you create the group - check Create VLAN enabled Group in the Group Ports
dialog box (see section 6.5.1).
After you create a group – using the Replace Group with VLAN enabled Group option
(described below).
To VLAN-enable a group using the Replace Group with VLAN enabled Group option:
1. In the Network Settings View, click a group in the Main Display.
2. Perform one of the following steps:
On the Network menu, click Replace Group with VLAN enabled Group.
–
–
Click Replace Group with VLAN enabled Group in the Network Actions panel.
Press the right mouse button and click Replace Group with VLAN enabled Group
–
from the shortcut menu.
6.6.4 Removing a Group from a VLAN
If you no longer want a group to participate in a VLAN:
1. In the Network Settings View, click a VLAN-enabled group in the Main Display.
2. Perform one of the following steps:
On the Network menu, click Replace VLAN enabled Group with standard Group.
–
Click Replace VLAN enabled Group with standard Group in the Network Actions
–
panel.
Press the right mouse button and click Replace VLAN enabled Group with standard
–
Group from the shortcut menu.
100
Chapter 6 Managing Management and Ethernet Ports and Portals