Installation
Installing the appliance
^ Set the plate warmer into the niche,
push is all the way in and align it at a
right angle.
^ Open the drawer and fix the
appliance with the two supplied
screws at the side panels of the
cabinet.
^ Install the combination appliance
regarding the manual supplied with
that machine.
18
Aligning the appliance front
After installing the combination
appliance it may be necessary to align
the appliance front and/or even the gap
between the plate warmer and the
combination machine.
Flat washers are supplied beneath the
knurled nuts, which fix the drawer to the
telescopic runners.
^ Loosen the knurled nuts and take the
drawer out.
^ Align and even the gap with the flat
washers by changing their position
(above or below the drawer), on both
sides.