Waste Toner Feeding Drive Assembly; Removing The Waste Toner; Feeding Drive Assembly/Waste; Toner Motor - Canon 1000 Service Manual

5) Remove the four screws [6], grip ring [7], and
gear [8]; then, remove the fixing motor [9].
[6] [7]
[9]
Figure 4-203E
COPYRIGHT © 2001 CANON INC.
[8] [6]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
F. Waste Toner Feeding Drive
Assembly

1. Removing the Waste Toner

Feeding Drive Assembly/Waste

Toner Motor

1) Disconnect the two connectors [1], and
remove the four screws [2]; then, remove the
waste toner motor [3].
Figure 4-201F
2) Disconnect the connector [4], and remove the
four screws [5]; then, slide out the waste toner
feeding assembly [6] to the front while shifting
it to the right.
[4]
Figure 4-202F
[1]
[3]
[2]
[5]
[5]
[6]
4-19