1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Desktop
  5. CF-71 Series
  6. Reference manual

Panasonic CF-71 Series Toughbook Reference Manual

Notebook
Hide thumbs Also See for CF-71 Series Toughbook:
Table of Contents

Advertisement

Quick Links

95
The descriptions for "Floppy disk drive" in the
manual apply to the optional SuperDisk™ Drive.
Similarly, the descriptions for "CD-ROM drive" in
the manual apply to the optional DVD drive.
Illustrations in this Reference Manual
WARNING:
[Start]-[Shut Down]:
Enter :
page:
:
We recommend that this Reference Manual be printed.
NOTE provides a useful fact or helpful information.
CAUTION indicates a condition that may result in minor or moderate injury.
WARNING indicates a hazard that may result in moderate or serious injury.
This illustration means to click [Start], then to click [Shut Down].
(For some applications, you may need to double-click.)
This illustration means to press the [Enter] key.
This illustration means to press and hold the [Fn] key, then press the [F5] key.
When the cursor is moved to an item under [Contents] or to
shape of the cursor will change to
click is made), the corresponding page in the Reference Manual will be displayed.
This illustration means to refer to the Operating Instructions.

Reference Manual

Contents
Key Combinations .............................................
LED Indicators ...................................................
Suspend/Hibernation Functions ......................
Security Measures.............................................
Computing On The Road................................
Battery Power .................................................
Using PC Cards ..............................................
Adding Memory ..............................................
Port Replicator ................................................
Using a Printer ................................................
Using an External Display .............................
Using USB Devices ........................................
Infrared Data Communications .....................
Hard Disk Drive ...............................................
Setup Utility ....................................................
Technical Information ....................................
List of Error Codes .........................................
DMI Viewer ......................................................
Dealing With Problems ...................................
. Under this condition, if characters are tapped (or a
Personal Computer
CF-71
(Touch Pad) .....................
page (green display), the
®
Series
2
3
4
6
9
15
19
25
29
30
31
32
33
34
36
37
39
45
46
48
49

Advertisement

Table of Contents
loading

Related Manuals for Panasonic CF-71 Series Toughbook

Summary of Contents for Panasonic CF-71 Series Toughbook

  • Page 1: Table Of Contents

    Personal Computer Reference Manual CF-71 Series Contents Key Combinations ..........LED Indicators ........... Panasonic Hand Writing (Touch Pad) ..... Suspend/Hibernation Functions ...... Security Measures..........Computing On The Road........ Battery Power ..........Using a Multimedia Pocket Device ....Using PC Cards ..........

  • Page 2: Note

    Key Combinations CAUTION Do not press the following key combinations repeatedly in (quick) succession. Do not press the following key combinations while using the touch pad (mouse) or other keys. Functions Popup Window LCD brightness con- Pressing this key combination adjusts the bright- When the bright- Fn + F2 trol...

  • Page 3: Led Indicators

    LED Indicators Caps Lock This indicator lights green when Caps Lock is pressed. Subsequent non- shifted input is capitalized. These indicators light green when NumLk is pressed and then Key Pad is NumLk (Numeric key) pressed while holding down the Fn key. This causes a portion of the keyboard to function as a numeric keypad.

  • Page 4: Panasonic Hand Writing

    Positions on the work surface of the touch pad have corresponding positions in the Panasonic Hand Writing window. For example, a character or figure made in the top-left part of the work surface of the touch pad will be displayed in the top-left part of the Panasonic Hand Writing window.
  • Page 5 Panasonic Hand Writing (Touch Pad) Close the Hand Writing mode Confirm that the [Panasonic Hand Writing] window is active, and then press the left button of the touch pad. NOTE In the following cases, the Hand Writing mode is automatically cancelled.

  • Page 6: Suspend/Hibernation Functions

    Suspend/Hibernation Functions Starting Up Your Computer Quickly If you want to immediately start up and continue an application after shutting down your computer, you can do so by using the suspend or hibernation function. Differences between the suspend and hibernation functions Function Suspend function Hibernation function...

  • Page 7: Resuming Operation

    Suspend/Hibernation Functions NOTE With the method below, you can shut down the computer by using the suspend function. Fn + F7 page Select [Suspend] from the [Start] menu. [Suspend] is deleted from the [Start] menu by unchecking [Allow Windows to man- age power use on this computer.] in [Start] - [Settings] - [Control Panel] - [Power] or by unchecking [Show suspend command on Start menu] in [Advanced].
  • Page 8 Suspend/Hibernation Functions Precautions for Using the Suspend or Hibernation Function Save all data before powering off your computer. When restarting from or shutting down to the suspend or hibernation mode, do not touch the touch pad (or move the mouse (serial or PS/2 type) if one is connected). These devices may fail to operate, you will then need to restart your computer using the keyboard.

  • Page 9: Security Measures

    Security Measures To prevent unauthorized access of your computer, the various security measures are provided below. Situation Function to use Reference You do not want your computer to be used without permission Supervisor Password below User Password You do not want the data on the hard disk to be read, or data to Hard Disk Lock below be written to the hard disk, in cases including theft.
  • Page 10 Do not forget your password. If your Supervisor Password is forgotten you will be unable to use your computer. Contact Panasonic Technical Support. When running the Setup Utility, do not leave your computer even for a short time, as the possibility exists for the password to be set/changed by another person.
  • Page 11 Use only the upper horizontal row of numeric keys to input your pass- word. Do not forget your password. If a password is forgotten, you will be unable to use your computer. Contact Panasonic Technical Support. When running the Setup Utility, do not leave your computer even for a short time.
  • Page 12 User Password for security reasons. Using , select [Hard Disk Lock], then press Enter NOTE If [Hard Disk Lock] is not displayed, contact Panasonic Technical Support. To enable the Hard Disk Lock Select [Enable], then press Enter At the [Caution], press Enter .
  • Page 13 Security Measures When you do not want your computer to be used without permission while away temporarily You should set the “Coffee Break Password” (Note that you must first set the User Pass- word). When you input your selected key combination, the computer locks (key input, use of the touch pad and use of an external mouse are no longer possible).
  • Page 14 Security Measures Preventing theft or damage to data using a floppy disk You may choose to protect the data on your computer from being accessed illegally or overwritten accidentally by using a floppy disk. You can also set your computer to be unbootable from a floppy disk.

  • Page 15: Computing On The Road

    Computing On The Road Conserving Power One of the main features of notebook-type computers is that you have the power of computing away from your home or office. In the following, information is provided on how to maximize use of the battery pack which is necessary for such computing. Four Important Points POINT Be sure to charge your battery before and after use.
  • Page 16 Computing On The Road NOTE It is necessary to check [Allow Windows to manage power use on this com- puter] in [Start] - [Settings] - [Control Panel] - [Power]. If the check is removed, the time may not be displayed properly when operation is resumed from the suspend or hibernation mode or the operating time with the battery pack may become short (the power management function of Windows does not work).
  • Page 17 Computing On The Road Power Management settings Power Management Enable (Always) Enable(Battery)* Disable Functions (Setting at the time of automatically set purchase) 1 min 1 min Never HDD Motor Timeout 2 min 2 min Never ECO Mode Timeout Power Conservation Enable Disable Disable...
  • Page 18 Computing On The Road Setting the Intel(R) SpeedStep (TM) technology You can control power consumption by setting CPU performance separately for “AC adapter connected” and “AC adapter disconnected (i.e., running on batteries).” For performance settings, select either [Battery Optimized Performance] or [Maximum Per- formance].

  • Page 19: Battery Power

    Blinking red* Battery pack or charger may not be working properly. Quickly remove the battery pack and disconnect the AC adapter, then connect them again. If the problem persists, contact Panasonic Technical Support. Blinking orange Battery capacity being refreshed. Blinking orange Unable to recharge due to violation of temperature limits.
  • Page 20 Battery Power When the Remaining Battery Charge Becomes Low save your data and power off your computer Following that: Plug in the AC adapter, and fully charge your battery. Use a spare battery if you have one. If you have neither the AC adapter nor an extra battery, power the computer off. If the suspend or hibernation function is set Red indicator lights Suspend Mode or Hibernation Mode...
  • Page 21 Battery Power Panasonic Battery Monitor It is possible to display the current battery status and the remaining battery power by running the Panasonic Battery Monitor. Select from the taskbar Battery Status AC: AC adapter connected (fully charged) AC-Charging: AC adapter connected (charging)
  • Page 22 Battery Power Accurately Displaying Battery Capacity The battery pack has a function for measuring, storing, and learning about battery capacity. Using this function properly to accurately display remaining battery capacity requires that the battery pack be fully charged (charged to 100%), then fully discharged, and then fully charged again.
  • Page 23 Battery Power Replacing the Battery Pack When the charge provided by your battery pack is supplied for only a short period of time, even after fully charging according to the instructions, it may be time to replace your battery pack. The battery pack is a consumable item and therefore will require replacement (CF-VZSU09).
  • Page 24 Battery Power Connect the battery pack Pull the tab outside the frame of the computer, and insert the non- Connector connector-side of the battery pack into the computer with the label- side up. Insert the connector-side of the battery pack into the computer to secure the connector.

  • Page 25: Using A Multimedia Pocket Device

    Using a Multimedia Pocket Device You may use an included CD-ROM pack (CF-VCD711), an optional DVD-ROM drive pack (CF-VDD711/CF-VDD712) or an optional Superdisk drive pack (CF-VFS712) by removing your floppy disk drive from the multimedia pocket. Installing/Removing a Multimedia Pocket Device Power off your computer "Starting Up/Shutting Down") Do not shut down using the suspend or hibernation mode.
  • Page 26 Using a Multimedia Pocket Device Parallel Port Using the Floppy Disk Drive as an External Drive You may use the floppy disk drive as an external drive that is connected through the parallel port, by using an optional FDD cable (CF-VCF351). In the operating instructions for the FDD cable (CF-VCF351), directions are given to turn the power off before connecting the floppy disk drive by using the cable, but with this computer, the floppy disk drive can be attached or removed while the power is...
  • Page 27 Using a Multimedia Pocket Device Using a CD-ROM Usage Precautions Do not place items other than CDs on the tray. Do not leave the tray in the open position or touch the lens area. Should the lens become soiled by dust or dirt, the unit may not read CDs properly. Do not apply excessive force to the tray in the open position, doing so could damage the tray.
  • Page 28 Using a Multimedia Pocket Device Software Preparation (first time only) The following settings are necessary to prepare the CD-ROM pack for use: Add the check mark for [DMA] in [Start] - [Settings] - [Control Panel] - [System] - [Device Man- ager] - [CDROM] - [TEAC CD-224E] - [Settings].

  • Page 29: Using Pc Cards

    Using PC Cards PC Card Your computer has two PC Card slots. These slots conform to the PC Card Standard; therefore, communications or SCSI devices, etc., may be utilized. The slots allow you to use two Type I or Type II cards (or one Type I and one Type II), or one Type III card. Type I or II Type III One card can be used only in the slot...

  • Page 30: Adding Memory

    Adding Memory RAM Module CAUTION Use a RAM module meeting the RAM module specifications below. If a module is used that does not meet the specifications, there are cases in which data may become unusable or the computer may not operate properly. RAM modules are extremely sensitive to static electricity.

  • Page 31: Port Replicator

    Port Replicator A port replicator is available as an option (CF-VEB711). This device eliminates the hassles of having you connect/disconnect the various cables when carrying your computer around and allows a variety of peripherals to be connected in- cluding a headphone or microphone, etc. The port replicator connects to the expansion bus connector on the bottom of your computer.

  • Page 32: Using A Printer

    Using a Printer Power off your computer "Starting Up/Shutting Down") Do not shut down using the suspend or hibernation mode. Connect the printer to your computer Parallel Port Turn on the printer, then turn on your computer with the LCD panel opened Setting your printer Go to [My Computer] - [Printers].

  • Page 33: Using An External Display

    Using an External Display Power off your computer "Starting Up/Shutting Down") Do not shut down using the suspend or hibernation mode. Connect the external display to your computer NOTE External Display Port For more detailed information, please refer to the operation manual of the external display.

  • Page 34: Using Usb Devices

    Using USB Devices Installing USB Devices Set the power management function to disable Run the Setup Utility. ( page Using , select [Power]. Using , select [Power Management] and press Enter . Using , select [Disable] and press Enter . Using , select [Sleep Switch] and press Enter .

  • Page 35: Removing Usb Devices

    Using USB Devices NOTE Execute the following steps if the operation of a USB device is unstable. When the steps below are implemented, however, faults such as Windows being unable to shut down exist when the USB HUB remains connected. (In such cases, remove the USB HUB.) In [Start] - [Run], input [c:\util\msupdate\usb\usbupd2.exe], then press [OK].

  • Page 36: Infrared Data Communications

    Infrared Data Communications Your computer is equipped with an infrared communications port enabling you to trans- fer data without a cable. Preparations for Infrared Data Communications Set the address of your infrared communications port to enable. ( below) Position your computer so that the port is face-to-face with the port of another computer. Be sure the computers are not in direct contact with one another.

  • Page 37: Hard Disk Drive

    Hard Disk Drive To change your hard disk drive, contact Panasonic Technical Support CAUTION To customers: To change your hard disk, contact Panasonic Technical Support. Be sure to back up all important data before the change. If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable] before the change.
  • Page 38 Hard disk Drive Lift the hard disk drive to remove it from the connector and gently set a new hard disk drive on to the connector. Connector Insert the ribs of the hard disk as shown in the figure, and while slightly pushing the hard disk to the left put the hard disk in place.

  • Page 39: Setup Utility

    Setup Utility Running the Setup Utility To run the Setup Utility, you Upon seeing press "Press <F2> to enter SETUP" need to restart your computer. this message NOTE Press F2 while [Press <F2> to enter SETUP] is displayed. The Setup Utility will not run if F2 is not pressed soon after the computer starts. In this case, you need to restart your computer.
  • Page 40 Setup Utility Main Menu BIOS Version: Vx.xxLxx System Time: [xx:xx:xx] System Date: [xx/xx/xxxx] System Memory: xxxxxKB Primary Master: xxxxxMB Secondary Master: None NumLock: [On] Touch Pad: [Enable] Speaker: [Enable] Display: [External Monitor] Parameters : Default) NumLock Touch Pad Disable Enable Speaker Disable Enable...
  • Page 41 Setup Utility Advanced Menu Serial Port : [3F8/IRQ4] IrDA Port: [2F8/IRQ3/DMA3] Parallel Port: [378/IRQ7] Mode: [Bi-directional] Internal CardBus Controller: [Enable] Parameters : Default) 3F8/IRQ4 Serial Port Disable 2F8/IRQ3/DMA3 IrDA Port Disable Parallel Port 378/IRQ7 3BC/IRQ5 Disable Mode Uni-directional Bi-directional EPP* DMA* DMA1 DMA0 Internal CardBus Controller...
  • Page 42 Setup Utility Security Menu Boot Up Drive: [A:/C:] Floppy Operation: [Enable] Set Supervisor Password: [Enter] Hard Disk Lock: [Disable] User Password Protection: [No Protection] Set User Password: [Enter] Coffee Break Password: [Disable] Processor Serial Number: [Disable] CAUTION If starting up the Setup Utility with the User Password; The User Password can only be set when the Supervisor Password has been set and [User Password Protection] has been set to [No Protection].

  • Page 43: Power Management Modes

    Setup Utility Power Menu Power Management: [Enable (Always)] HDD Motor Timeout: 1 min ECO Mode Timeout: 2 min Sleep Switch: [Hibernation] Hibernation Timeout: * [4 min] Fn+F7/Fn+F10 key [Enable] CD-ROM Drive Speed: [High] Parameters : Default) Power Management Disable Enable (Battery) Enable (Always) Automatically set through setting of Power Management Mode (1 min / Never) HDD Motor Timeout...
  • Page 44 Setup Utility Exit Menu Save Values & Exit NOTE Exit Without Saving Changes Get Default Values If the Supervisor Password or User Load Previous Values Password has been set, the pass- Save Current Values word must be entered before Win- dows can start.

  • Page 45: Technical Information

    Technical Information Network The network connection may be severed when entering the ECO mode and sus- pend (hibernation) mode. Be sure to disable the [Suspend/Hibernation Timeout] settings with the Setup Utility if you require a network environment. When the power saving function is running, communications software may mal- function.

  • Page 46: List Of Error Codes

    If your system displays one of except the messages marked below with an asterisk (*), write down the message and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error.
  • Page 47 List of Error Codes 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error: Fail-Safe Timer takes too long.

  • Page 48: Dmi Viewer

    CPU and memory. Running DMI Viewer Select [DMI Viewer] from [Start] - [Programs] - [Panasonic]. The screen shown below is displayed. When you click on an item, detailed information on that item will be displayed.

  • Page 49: Dealing With Problems

    Dealing With Problems When a problem occurs, please refer to this page. If you still cannot troubleshoot the problem, please contact Panasonic Technical Support. Starting Up The power indicator or Check the cable connection for the AC adapter. battery indicator is not lit Check to see if a fully charged battery is properly installed.
  • Page 50 Dealing With Problems Display No display after powering At the time of purchase, the display setting is preset for an external display. If you connect an external display, the screen is displayed on the external display. When there is no display to an external display, •...
  • Page 51 Check to see if the hard disk is full. If it is full, delete unnecessary files. Your hard disk content may be corrupted. Contact Panasonic Technical Support. When the previous item Try testing another drive or media.
  • Page 52 Restart the Setup Utility with the Supervisor Password. [Coffee Break Password] You need to set the User Password. cannot be selected [Hard Disk Lock] is not The internal battery maintaining the clock may need to be replaced. Contact Panasonic displayed Technical Support. Application Software Computer hangs...
  • Page 53 If a switch is made to the Hand Writing mode in Panasonic Hand Writing, any external mouse or trackball connecting to the external keyboard/mouse port will not operate. Reconnect the device after quitting the Hand Written mode. If the device still does not work, try restarting the computer.
  • Page 54 Pentium is a registered trademark of Intel Corporation. Imation, the Imation Logo, the circle-pyramid logo, SuperDisk and SuperDisk logo are trademarks of Imation Corp. Acrobat is a registered trademark of Adobe Systems Incorporated. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. PCE0034A_95...

Table of Contents