Table of Contents
Advertisement
4. CAMERA MOUNTING
Caution: The selected mounting location should
not place the camera in a situation where its
environmental specifications could be exceeded.
See Section 6, page 15.
The supplied mounting bracket contains two
holes for attachment to any suitable flat surface.
The type of mounting hardware is dependent on
the selected surface. e.g., wood, metal, plaster,
gyproc, etc.
Refer to Figure 4-1 on page 11.
Once the bracket has been secured, attach the
camera housing to the adjustable camera
bracket with the supplied mounting knob. Adjust
for desired camera viewing angle and tighten the
screw located at tip of the mounting bracket.
Refer to Figure 4-2 on page 12.
Note: The power / video cable should be
secured in a way that no undue stress is placed
on the camera housing or its mounting bracket.
- 10 -
Advertisement
Table of Contents
