52
USING THE TOUCH SCREEN
USING THE TOUCH SCREEN
To Use the Touch Screen on
Windows 7 / 8 (Enterprise)
Plug a USB cable into a TOUCH USB port on the
back of the monitor.
Back of the product
PC
Then, connect the USB cable to your PC so that it
automatically recognizes the touch screen monitor.
* Windows 7
* Windows 8 (Enterprise)
Go to Control Panel > System and Security >
System. You will see the number of touch-points
supported under Pen and Touch.
CAUTION
Once your PC recognizes the monitor, you
y
will be able to use the touch screen.
NOTE
The monitor can respond to 10 Touch
y
Points when connected to a Windows 7 / 8
(Enterprise) computer.
When using the touch screen monitor, it is
y
recommended to set the screen aspect ratio
to Just Scan.
For more information about gestures and
y
settings on Windows 7 / 8 (Enterprise), refer
to Windows Help.