2. Hardware Installation
Fujitsu PCNA EP OCe14102 Accessories
Table 2-2 provides model number, name, interface and required quantities if you want
to order additional or replacement transceivers, or cables.
Table 2-2 Emulex OneConnect Accessories
Model Number
PCNA SFP+ MMF
OCE14102
Applying Power
To apply power:
1. Verify that the adapter is securely installed in the computer.
2. Verify that the correct device is attached.
3. Plug in and turn on the computer.
4. Observe the boot banner for Power On Self Test (POST) results.
Viewing the LEDs
Each port connector has two LEDs: an amber LED and a green LED.
Amber LED (Link)
On (constantly) = Link up
Off = Link down
Green LED (Ethernet Activity)
Blink = Activity on the Ethernet link
Off = No activity on the Ethernet link
PCNA EP OCe14102 2x 10Gb
Model Name
SFP+ 10 Gigabit Ethernet
10GBASE-SR/SW Transceive
Applying Power
Quantity
Interface
1 pc
10Gbase-SR Optical
Page 13