4: Bundling The Cables - Sony XBR-70X850B Operating Instructions Manual

• Your TV is shipped with screws attached
to the rear of the TV depending on the TV
model. (They are fastened in the screw
holes for wall mounting.) Be sure to
remove the upper two screws prior to
anchoring the TV to a wall.
• Securing the TV to the stand without
securing the TV and the stand to the wall
provides minimum protection against the
TV toppling over. For further protection,
be sure to follow the three measures
recommended.
4: Bundling the
cables
................................................................................................................ iiJMiii!!!! !!iiJiiii{ _................................................................................................. _i_
Before bundling the cables, remove the
cable holder from the AC cover. Reuse the
cable holder to bundle the other cables.
• Do not bundle the AC power cord together
with other cables.
1
ii !i i
!i!i, !_
2
* When the Table-top Stand is attached to middle
position, you can choose either hole to attach the
cable holder.
21 us