13. TECHNICAL INFORMATION..................20 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before maintenance, deactivate the appliance and •...
ENGLISH • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
Rating plate Lower basket Salt container Upper basket Air vent Cutlery drawer Rinse aid dispenser Detergent dispenser 3.1 TimeBeam The TimeBeam is a display that shows on the floor below the appliance door. • When the programme starts, the programme duration comes on.
Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • Multitab • Crockery and • Wash 50 °C cutlery • Rinses • Dry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
ENGLISH Water Energy Duration Programme (kWh) (min) 9 - 10 1.0 - 1.2 219 - 229 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test info.test@dishwasher-production.com institutes...
Page 11
ENGLISH 6.4 Use of rinse aid and multi- not possible to deactivate these acoustic signals. tablets There is also an acoustic signal that The factory setting of the rinse aid sounds when the programme is dispenser is with the dispenser activated. completed.
• The indicator continues to 3. Press again and again to change flash. the colour. • The display shows a number and • You can see the different colours the letter C. Each number refers on the kitchen floor.
ENGLISH We recommend the ''sanitisation'' of the If the option is not applicable to the appliance before and after a long programme, the related indicator does absence (e.g. holidays). not come on or it flashes quickly for a few seconds and then goes off. How to activate ExtraHygiene The display shows the updated programme duration.
8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
ENGLISH Starting a programme If the door is opened for more than 30 seconds 1. Keep the appliance door ajar. during the drying phase, the 2. Press the on/off button to activate running programme will end. the appliance. Make sure that the appliance is in programme selection Cancelling the delay start while mode.
10.3 What to do if you want to • When loading the appliance, make sure that the dishes can be stop using multi-tablets completely reached and washed by the water released from the spray arm Before you start to use separately nozzles.
ENGLISH • The spray arms are not clogged. 2. First remove items from the lower • There is dishwasher salt and rinse aid basket, then from the upper basket. (unless you use multi- tablets). At the end of the • The position of the items in the programme water can still baskets is correct.
11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 External cleaning • Clean the appliance with a moist soft cloth.
ENGLISH 12. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation. Before you contact an shows an alarm code. Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table.
Problem Possible solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad- drops on glasses and dishes. just the rinse aid selector to a higher position. • The quality of the rinse aid can be the cause.