Bosch Carephone 50 ISA-50-MS User And Programming Manua page 32

32 en | Programming
60 Message repetition to telephone
You can use programming step 60 to specify how often the
Carephone will repeat the message.
Example:
1.
2.
3.
4.
You can program a setting from 1 to 9 for the required number.
61 Incoming call recognition
Incoming phone calls can be accepted by the HTS50 and the call
can be conducted with the hands-free feature. The call can be
accepted and terminated using the emergency call button. A call
can also be taken using the RF pendant if it is programmed for
emergency call initiation. The call tone on the HTS can be
switched on or off and the volume can be adjusted. You program:
ISA-50-MS V2 I 2008.02
The HTS sends an emergency call to a phone.
The emergency call is taken by a private individual rendering
assistance.
The HTS plays the announcement: This is social alarm
unit 123.
The HTS repeats the announcement according to the
setting.
0 = Off
1 = HTS registers call with call tone
2 = HTS registers call with loud call tone
3 = HTS registers call with soft call tone
4 = HTS registers call with no call tone (the phone rings)
User Manual
Carephone 50
Bosch Security Systems