Imaging Tab
Configuring Manual Focus Settings
Figure 3-7
Manual Focus Page
Place your mouse pointer over the Imaging tab.
Step 1
Select Focus from the drop-down menu.
Step 2
Select the Manual mode.
Step 3
Set one of the following settings:
Step 4
•
•
•
Set the Manual Focus Position. The focus range is 0 to 100.
Step 5
If required, click the Factory Defaults button to reset the focus to the factory default setting.
Step 6
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
3-20
Day Manual Focus Position: This is the position of the focus mechanism when the IR cut filter is
applied. The day mode focus position range is 0 to 100.
Night Manual Focus Position: This is the position of the focus mechanism when the IR cut filter
is removed. The night mode focus position range is 0 to 100.
Manual Focus Position: This is the manual setting of the focus mechanism. The focus range is
0 to 100.
Chapter 3
Operation
OL-22669-01