ABB -free home System Manual page 16

04 Commissioning
Option C: Establishing the connection with the PC via
patch cable (Fig. 12)
1. Connect the System Access Point and the PC with the
router.
Energize the System Access Point and ensure that the
access point mode is not activated. If it is activated,
press the access point button to deactivate it.
Note: The System Access Point now functions as
"DHCP Client". This means that it can only be reached
under the IP address that is assigned to it automatical-
ly by the router.
2. Call up the user interface of the System Access Point.
There are 2 options:
A - Open the Windows Explorer on your PC. The Sys-
tem Access Point is displayed as device under "Net-
work". Double click on the device to open the user in-
terface (prerequisite: the computer must support
UPnP).
B - Enter the IP address that has been assigned au-
tomatically by the browser in the address line of the
browser (you will find the assigned IP address in the
user interface of your browser.
Example, Fritzbox:
under "Home network->Network" set the view on
"Extended" to fade in the IP address).
3. The connection to the System Access Point has been
established.
16 │
ABB-free@home
System Manual
®