Important Information Regarding The Waterproofing Of The Camera - HP lc100w User Manual

posted sign requests you to switch off any device that may
interfere the radio frequency.
‧Explosion sites or any location with a posted sign: In order to
prevent interfering with an explosion activity, observe all the
signage and instructions in the Explosion Area or in a zone with a
"Switch Off 2-way Radios" sign by switching off devices that
may interfere with the radio frequency.
This product is unsuitable for filming any barcode.
The camera has become too hot and needs to cool down after
using over than 1 hour (continuous recording). Simply shut down
for cooling before attempting to use it again. It won't damage the
camera, it is only for reminding the user that the temperature of
the equipment cannot be too high.
Important information regarding the waterproofing of
the camera
This product complies with Class V of IEC waterproof classification (IPX5),
being capable of sustaining low-pressure water jets in all directions, and
possesses waterproof properties for normal activities.
Precautions prior to using the device:
Make sure that no foreign objects, sand or dust are attached to
the waterproof cover of the USB/memory card slot. If foreign an
object has become attached, remove it carefully with a lint-free
cloth.
Make sure that there is no crack or damage on the waterproof
cover of the USB / Memory card slot.
Verify carefully that the waterproof cover of the USB / Memory
card slot is sealed tightly; make sure the cover is not open in a
wet situation.
Do not open/close the waterproof cover of the USB / Memory
card slot with a wet hand, otherwise electric shock or device
malfunction may occur.
8