Button Functions - Epson RUNSENSE SF-810 User Manual

Note:
O When you do not use the product for a while, it enters sleep mode and the display turns off. The display will turn back
on the next time you move the product. You can also turn off the sleep function.
See "System Set. options" on page 76.
O The Time screen is displayed if you don't press any buttons for a set period of time. This period of time varies
depending on the current screen:
Sys. Settings/User Settings/Recall screen: 3 minutes.
Measurement Screen (while not measuring): 60 minutes.
O The Measurement screen is displayed if you don't press any buttons for thee minutes on the Measure set. menu
screen.

Button functions

The function for each button changes depending on which screen is displayed.
Time screen
Button
Short press
A
Long press (two seconds
or more)
Short press
B
Long press (two seconds
or more)
Short press
C
Short press
D
Long press (two seconds
or more)
* Measures your pulse (heart rate) when worn on your wrist. Your current heart rate will be displayed on the watch display,
but will not be recorded.
See "Wearing the product" on page 13.
Setting up your SF-810
Starts pulse (heart rate) measurement.*
Turns the power on or off.
Turns the light on or off. The light turns on for approximately 10 seconds.
Displays the Settings menu.
See "Settings screen (Settings menu/Measure set. menu)" on page 25.
Performs GPS positioning, and displays the Measurement screen.
See "Measurement screen" on page 25.
Displays a record of the measurement history (Recall screen).
See "Recall screen" on page 26.
®
Performs Bluetooth communication. Use this when uploading measurement
data.
24
Description