Sony STR-DN840 Operating Instructions Manual page 69

1
Tap/click on the
right of the iOS device screen or
iTunes window.
[iOS device]
[iTunes]
2
Select "STR-DN840" on the AirPlay
menu of iTunes or your iOS device.
[iOS device]
[iTunes]
icon at bottom
3
Start playing back audio content
on an iOS device or on iTunes.
AirPlay is selected as a function of the
receiver automatically.
Tips
• "******" is the last 6 digits of MAC Address of
the receiver.
• If the playback does not start, perform the
process again from step 1.
To confirm/edit the device
name
See "Device Name" (page 90) for
instructions on how to rename the device.
To control AirPlay playback
2
You can use the
> , SHUFFLE and REPEAT buttons.
Operation from the receiver and the remote
control is active only when the receiver is
selected as the device for output.
When you use iTunes, set an iOS device to
accept control from this receiver and the
remote control when you want to use this
receiver and the remote control to operate
an iOS device.
Tips
• The most recent control command to the
receiver is given priority. The receiver starts
playing back audio content of another device
when it accepts control from that AirPlay-
equipped device, even if this receiver is being
used for AirPlay with the original device.
• The very loud sound may output from this
receiver when you set the volume too loud using
iOS devices or iTunes.
• For details on the use of iTunes, refer to the
Help of iTunes.
• The volume level of iOS devices or iTunes may
not be able to be linked with the volume level of
this receiver.
+/–, , , , ,
N X x .
69
GB