Assembly - Sony SmartBand TalkSWR30 User Manual

To charge your SmartBand Talk
1
Plug one end of the USB cable into the charger or into the USB port of a
computer.
2
Plug the other end of the cable into the Micro USB port of your SmartBand
Talk.
If you are charging the device for the first time, make sure you charge it for at least 30
minutes.
To check the battery level of your SmartBand Talk
•
From the main application screen of your Android™ device, find and tap
SmartBand™ Talk > STATUS.
Low battery level notification
When your SmartBand Talk is on and the battery level goes below 15 percent, it
emits one short vibration and a warning notification appears on the screen to indicate
that the battery is low. The warning gets repeated when the battery reaches charge
levels of 10 and 5 percent, respectively.
Talk when the battery runs out of power, indicating that you need to charge it.
To dismiss a battery warning notification
•
Short press the function key.

Assembly

To personalise your SmartBand Talk, you can replace the wristband with bands of
different colour and length, which can be purchased separately.
When you change the wristband, you may also have to replace the attachment clips with clips
of a suitable size or type.
This is an Internet version of this publication. © Print only for private use.
displays permanently on your SmartBand
5