INSTALLATION
aSSeMBLING THe CLaMP-WIre
Clamp-Wire
attach the clamp-wire to the unit as shown, and then run the cables through the clamp-wire to keep them
neat.
MOuNTING THe COVer-FOOT ONTO
SuBWOOFer
1
2
3
1. Place each Cover-Foot on the 4 holes correspondingly as shown in the illustration.
2. Insert Screw-Taptite (4ea) into corresponding hole of Cover-Foot.
3. Block up the holes with Foot rubber (4ea) to complete.
15