Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Advertisement
Table of Contents
Related Manuals for JVC DT-E15L4
Summary of Contents for JVC DT-E15L4
- Page 1 MULTI FORMAT LCD MONITOR DT-E15L4 INSTRUCTIONS This is the English instruction manual. Instruction manuals in other languages (German, French, Italian, Spanish, Russian, Chinese) are included on the supplied CD-ROM as PDF files. ® LCT2710-001A...
-
Page 2: Safety Precautions
Safety Precautions The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 Do not attempt to service this product yourself, as opening or • The AC power supply is controlled by turning on/off the removing covers may expose you to dangerous voltages and POWER switch on the rear panel. If the product is installed in a other hazards.
-
Page 4: Dear Customer
If you wish to dispose of this product, please visit our web page http:// In case where the strong electromagnetic waves or magnetism are www.jvc.eu/ to obtain information about the take-back of the product. near the audio cable or the signal cable, the sound or the picture will contain noise. -
Page 5: Sicherheitsmaßregeln
Sicherheitsmaßregeln Das Blitzsymbol in einem gleichseitigen Dreieck weist auf das Vorhandensein von CAUTION nicht isolierten Teilen mit „gefährlicher Spannung“ innerhalb des Gehäuses hin, RISK OF ELECTRICAL SHOCK die bei unvorsichtigen Eingriffen zu DO NOT OPEN elektrischen Schlägen führen können. VORSICHT: Zur Verhinderung von elektrischen Schlägen. Das Ausrufezeichen in einem Keine Abdeckungen (oder Rückplatten) gleichseitigen Dreieck soll den Anwender... - Page 6 Sicherheitsmaßregeln (Forts.) Versuchen Sie nicht, das Produkt selber zu warten, wie etwa • Die Netzstromversorgung wird durch Ein-/Ausschalten des durch Öffnen von Abnehmen von Abdeckungen. Im Inneren Netzschalters (POWER) an der Rückseite gesteuert. Wenn das befinden sich Teile mit gefährlicher Hochspannung und andere Produkt an einem Ort aufgestellt ist, wo er sich nicht leicht Gefahrenquellen.
- Page 7 Richtlinien. Dieses Gerät ist elektrischer Sicherheit. für professionelle Videoausrüstungen ausgelegt und kann in den folgenden Umgebungen verwendet werden: Die europäische Vertretung von JVC KENWOOD Corporation ist: • Umgebung mit kontrollierter EMV (zum Beispiel speziell gebaute JVC Technical Services Europe GmbH Postfach 10 05 04 Sende - oder Aufnahmestudios) und ländliche Umgebungen im...
-
Page 8: Précautions De Sécurité
Précautions de sécurité The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 9 N’essayez pas de réparer vous même cet appareil, car ouvrir • L’alimentation secteur ou retirer des couvercles vous exposerait à des tensions est commandée par la mise sous/hors tension au niveau de dangereuses ou d’autres dangers. Confier toutes les réparations l’interrupteur POWER sur le panneau arrière.
- Page 10 Ce matériel électrique. est conçu pour des applications vidéo professionnelles et peut être utilisé dans les milieux suivants: Le représentant européen de JVC KENWOOD Corporation est: • Milieux contrôlés EMC (par exemple studio d’enregistrement ou JVC Technical Services Europe GmbH Postfach 10 05 04 conçu pour la diffusion), et en extérieur (loin des lignes de chemins...
-
Page 11: Precauzioni Di Sicurezza
Precauzioni di sicurezza The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 12 Precauzioni di sicurezza (cont.) Non tentare di riparare l’apparecchio da sé, poiché l’apertura o • L’alimentazione CA dell’apparecchio è controllabile la rimozione dei coperchi può esporre a tensioni pericolose o ad agendo sull’interruttore POWER del pannello posteriore. Se altri pericoli. Si raccomanda piuttosto di rivolgersi a personale l’apparecchio è...
- Page 13 Qualora si desideri smaltire questo prodotto, visitare la nostra suono o le immagini potrebbero essere disturbate da rumore. In tal pagina web http://www.jvc.eu/ per ottenere informazioni sul ritiro del caso si raccomanda di mantenere questi cavi lontani da qualsiasi prodotto.
-
Page 14: Precauciones De Seguridad
Precauciones de seguridad El símbolo de relámpago con la punta en forma de flecha dentro de un triángulo CAUTION equilátero tiene el propósito de alertar al usuario la presencia de “voltaje RISK OF ELECTRICAL SHOCK peligroso” no aislado dentro de la caja del DO NOT OPEN producto, que puede tener la intensidad suficiente para constituir un riesgo de... - Page 15 Jamás intente reparar este producto por su cuenta, ya que • La fuente de alimentación de CA se controla mediante la si abre o desmonta las cubiertas, puede quedar expuesto activación/desactivación del interruptor POWER en el panel a descargas de tensión y otros peligros. Deje todo el trasero.
- Page 16 Directivas Europeas. Este equipo ha sido diseñado para aparatos de vídeo profesional y puede utilizarse en los El representante para Europa de JVC KENWOOD Corporation es: siguientes entornos: JVC Technical Services Europe GmbH •...
-
Page 17: Меры Предосторожности
Меры предосторожности The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 18 Меры предосторожности (продолж.) • Питание переменным электрическим током управляется включением/выключением выключателя питания POWER, расположенного на задней панели. Если изделие установлено в месте, где сложно включать/выключать переключатель POWER, управляйте включением/ выключением питания подключая/отсоединяя вилку шнура питания к/от розетки питания переменного тока. В этом случае...
- Page 19 Только для Европейского Союза JVC KENWOOD Corporation: JVC Technical Services Europe GmbH Postfach 10 05 04 • В условиях контролируемой EMC (например, специально 61145 Friedberg построенные вещательные или записывающие студии), в Germany ( условиях использования вне помещений в сельской местности...
- Page 20 • • • • • – – – AC 120 V – AC 220 – 240 V – • • AC 120 V AC 220 – 240 V AC 220 – 240 V • • ☞ • • AC 120 V AC 220 –...
- Page 21 • POWER POWER • • 120 V/220 - 240 V 50 Hz/60 Hz • • • • • • • • • VESA M4 x 10 mm VESA M4 x 10 mm...
-
Page 23: Table Of Contents
Operating Precautions The LCD panel and backlight have life expectancy. Due to the basic characteristics of the LCD panel, an afterimage or uneven display may occur. It is recommended that you change images occasionally, activate the power saving function, or often turn off the power to reduce the load on the LCD panel. -
Page 24: Installation
Installation ● Do not rest your arm on the monitor or lean against the monitor. ● Do not touch the LCD panel when installing the monitor. ● Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. ●... - Page 25 ● To install the monitor on a wall Caution You can install the monitor on a wall by changing how the stand bottom plate is attached. ● Consult authorized service personnel for electrical work. Using power cords damaged during installation (i.e., exposed or severed Installation Only for Authorized Service Personnel wiring) may result in fire or electric shock.
-
Page 26: Index Of Parts And Functions
Index of Parts and Functionos Rear panel Security slot Attach a security wire to this slot. 1 REMOTE terminal Terminal for controlling the monitor by an external control (☞ “External Control” on page 40). 2 VIDEO terminals (BNC) Input (IN) and output (OUT) terminals for the composite signals. 3 E. - Page 27 8 AUDIO (MONITOR OUT) terminals (pin jack) Output terminals for the analog audio signal. ● The terminals emit the audio signals through the AUDIO (IN) terminal or EMBEDDED AUDIO signals through the E. AUDIO HD/SD SDI (IN 1 or IN 2) input terminal. ●...
-
Page 28: Front Panel
Index of Parts and Functionos (cont.) Front panel Tally lamp This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. • You can select the color of the tally lamp from “Green” or “Red.” You can also select whether the whole lamp is turned on at once, or whether it is turned on one half at a time. -
Page 29: Showing Input Signals
Showing Input Signals Volume Adjustment/Audio Channel Selection Volume Adjustment When no menu screen is not displayed, press (volume adjustment button). For SDI input the “Volume/Embedded Audio” screen appears. For any input other than SDI the “Volume” screen appears. Press to move the cursor to “Volume”. (This step is skipped when the ”Volume/Embedded Audio”... -
Page 30: Menu Configuration
Menu Configuration First Time Installation When you turn on the power and the monitor, “First Time Installation” appears. Start setting referring to the menu configuration. For the setting items, see the pages below. ☞ “Language” on page 38 • “Language” ☞... -
Page 31: Menu Transition Diagram
Menu Transition Diagram Main Menu Picture Function Backlight Auto Adjust Aperture H Size Aperture Level H Position Size/Position Adjust V Size V Position Gamma Dot Clock Aspect Color Temperature Clock Phase sub menu sub menu reset reset Signal Setting Component/RGB Select Auto Aspect Sampling Mode Manual Aspect... -
Page 32: Main Menu
Menu Configuration (cont.) Main Menu Picture Function Setting for the picture quality. Item To do Setting value Backlight Adjusts the brightness of the display. –20 to +20 Aperture* Activates/deactivates the function at the level set in “Aperture Level”. Off, On Aperture Level* Compensate the frequency response of the luminance signal of the video signal. - Page 33 Signal Setting Settings for input signals. Item To do Setting value Component/RGB Select Selects the signal type you want to use for COMPO./RGB terminals. Component, RGB Sampling Mode Analog RGB input Standard: When the input signal is VGA60 or XGA60 Wide: When the input signal is WVGA60 or WXGA60 Standard, Wide When the input signal is other than the above, the setting value does not affect the...
-
Page 34: Audio Setting
Menu Configuration (cont.) Audio Setting Settings for the audio signals and audio level meter signal. Item To do Setting value SDI-1 Select Select the input through which audio is output. Auto, E.Audio, SDI-2 Select 1ch+2ch, 1ch, 2ch, Auto Output digital audio prior to analog audio. E.Audio Output audio from the SDI terminal. - Page 35 Sync Function Settings for the synchronization with signals. Item To do Setting value No Sync Action Select the screen status when no signal is coming in. Off, Standby, Power Save (power save mode) Gray Back (gray screen) Delay Time Select the period until the screen status changes as selected in “No Sync Action” after signals 30s, 5min, 15min stop coming in.
-
Page 36: Set-Up Menu
Menu Configuration (cont.) Set-Up Menu Function Setting Settings for the sub menu display, color of the tally lamp, and the intensity of the button lamps. Item To do Setting value sub menu Position Select the contents and displaying position of “sub menu.” Lower1, Upper1, Lower2, The setting values and features are as follows. - Page 37 Picture Sub Adjust Configure the standard level of image adjustment. Item To do Setting value Contrast* Adjust the standard level for the contrast adjusted with the CONTRAST knob on the front –20 to +20 panel. Bright* Adjust the standard level for the brightness adjusted with the BRIGHT knob on the front –20 to +20 panel.
- Page 38 On, Off On: Displayed, Off: Not displayed IMD Protocol Serial communication protocol setting Off, TSL V4.0 Off: Supports JVC protocol, TSL V4.0: Supports TSL UMD Protocol V4.0 Address Address setting 000 to 126 000 to 126: Set a particular address...
- Page 39 ● Setting of “Character Setting” Change the input to one that you want to assign a video source name for. Select “Character Setting”. C hara ct er S et t in g Press buttons to select the first character. ● Each time you press button, the character changes as follows.
-
Page 40: External Control
External Control About the external control Using the Make/Trigger system This monitor has three external control terminals. The Make/Trigger terminal is configured as follows. You can assign a ● Make/Trigger terminal (RJ-45): The following external control function to each pin terminal in “Remote Setting” (☞ “Pin1, Pin2, Pin3, systems are available. -
Page 41: Using The Serial Communication
<Functions controlled by the Make/Trigger system> Display Functions to be controlled Opening Short-circuiting – – – No function. — — Tally lamp color selection.* Green Tally Color Tally lamp lighting method selection. Whole One half at a time Tally Type Light the left half of the tally lamp in red.* Tally-L(R) Light the right half of the tally lamp in green.*... - Page 42 External Control (cont.) <Command outline> All commands consist of the following segments. Header Monitor ID Function Data Cr (0Dh) On Header “!” : Operation commands from the personal computer, etc. (☞ <Basic command list> below table). “?” : Reference commands from the personal computer, etc. “@”...
-
Page 43: Troubleshooting
Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page ●... -
Page 44: Self-Check Program
Troubleshooting (cont.) Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT (COMPO./RGB, VIDEO) lamps will flash. If this happens, follow the steps below and contact your dealer to resolve the problem. -
Page 45: Specifications
Specifications General Model name DT-E15L4 Type Multi format LCD monitor Screen size Type 15 wide format Aspect ratio 16:9 Horizontal/vertical frequency 31.469 kHz – 75.000 kHz (computer signal) 49.990 Hz – 75.062 Hz * Some signals within this frequency range may not be displayed (“Out of range” is displayed). -
Page 46: Dimensions
Specifications (cont.) Dimensions Unit: mm DT-E15L4 VESA mounting holes <Front view> <Side view> <Rear view> (Size: M4, depth: 10 mm) 46.3 To install the monitor on a shelf <Top view> <Side view> 36.7 13.3 To install the monitor on a wall <Rear view>... -
Page 47: Available Signals
Available signals The following signals are available for this monitor. Video signals Input terminal Signal format shown in Signal name the status display E.AUDIO * VIDEO analog COMPO. analog RGB HDMI (☞ page 29)* HD/SD SDI NTSC NTSC √ — —... - Page 48 Notice on transportation This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. ● For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.
-
Page 49: Краткое Руководство Пользователя
Краткое руководство пользователя Задняя панель Гнездо безопасности Прикрепите шнур безопасности к этому гнезду. 1 Разъем REMOTE Разъем для управления монитором с помощью внешнего устройства. 2 Разъемы VIDEO (BNC) Входной (IN) и выходной (OUT) разъемы для композитных сигналов. 3 Разъемы E. AUDIO HD/SD SDI (IN 1, IN 2) (BNC) Входные... - Page 50 Краткое руководство пользователя (продолж.) 8 Разъемы AUDIO (MONITOR OUT) (штекерное гнездо) Выходные разъемы для аналогового аудиосигнала. ● Разъемы выводят аудиосигналы, поступающие с разъема AUDIO (IN) или сигналы EMBEDDED AUDIO, поступающие с входного разъема E. AUDIO HD/SD SDI (IN 1 или IN 2). ●...
- Page 51 Передняя панель Сигнальный индикатор Данный индикатор управляется функцией сигнальной индикации разъема MAKE/TRIGGER. • Вы можете выбрать цвет сигнального индикатора из “Зеленый” (ЗЕЛЕНЫЙ) или “Красный” (КРАСНЫЙ). Вы также можете выбрать, включается индикатор сразу полностью или он включается наполовину за раз. • При...
- Page 52 © 2012 JVC KENWOOD Corporation LCT2710-001A...