Table of Contents
Advertisement
2
Getting Started
This guide provides a pre-installation checklist and instructions for installing the AirDefense Server,
accessing the Graphical User Interface (GUI), and performing initial server configuration using the
System Setup Wizard.
2.1 Pre-installation Checklist
Location & Equipment
• Server appliance and box contents
• Standard, grounded 100-240 VAC 50/60 Hz connection
• Keyboard and monitor
• Standard 19-inch rack (1U height) with mounting rails.
Server Appliance Requirements
• Password List—located in the shipping email and attachment from AirDefense
• AirDefense License—located in the shipping email and attachment from AirDefense
• IP address, subnet mask, FQDN, or domain name of any devices you want to use in a SSH
connection to the appliance
• Decide whether to specify time settings or use an NTP server. If you want to use an NTP
server, you need the IP or FQDN of the server.
Network Information
• IP address, subnet mask, default gateway to use for the appliance
• DNS Servers
• Mail Relay
• IP Address (of the System the Admin uses).
Network Access Requirements
• TCP 443 (https)—used when Sensors connect to the AirDefense Server.
• TCP 8543—default, used for remote access via the web browser.
• TCP 22—used for SSH (protocol 2 only) access for occasional administrative tasks.
Getting Started
3
Advertisement
Table of Contents
