Preparations Before Using; Names Of Parts - Hitachi CL-8800BF Instructions Manual

Features
Since two Ni-cd-batteries are built in, the device can be used for about 60
minutes with a full charge.
Cutting length can be adjusted to 3mm, 6mm, 9mm and 12mm by using the
cropped hair attachments.
Cordless 5 hour charging/AC type.

Names of Parts

Cropped hair attachment
S
6
mm
3
mm
L
12 mm
9 mm
Cap
Please be sure to attach during recharging
and after use to protect the blade.
Hold the center section and remove.
Cleaning brush Lubricating oil
Charge indicator lamp
Head
Body
Switch
Blade
- 1 -

Preparations Before Using

Before using, first charge the unit or connect to AC outlet.
Procedure for Charging
1.
2. Insert adaptor plug into outlet.
During charging, the charge indicator lamp lights.
Standard charging time is 5 hours.
The unit can be operated for about 60 minutes on a full charge.
Do not use continuously for more than 20 minutes. To use for longer periods, stop
and allow to rest about 10 minutes and lubricate oil to the cutting edge. Continuous
use of the unit for over 20 minutes may cause deterioration of cutting performance.
3. After charging the unit, unplug adaptor and
power feed plug.
Do not pull on cord when removing power plug.
Do not charge the unit if room temperature
℃
exceeds 40 or drops below 0
temperatures will shorten battery life.
Power feed plug
Unit socket
℃
. Extreme
- 2 -