2.7 [1] Configuration
Programming Manual References
2.11.7 [5-5] External Sensor
Feature Manual References
1.5.9 External Sensor
2.7.26 [1-1] Slot—OPB Card Command (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Commands for the service cards installed on the OPB card can be programmed.
INS
Puts the card in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.26 [1-1] Slot—OPB Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
OUS
Takes the card out of service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.26 [1-1] Slot—OPB Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
204
PC Programming Manual