Advertisement

TG106x_QG(e).fm Page 1 Friday, December 19, 2008 2:55 PM

Quick Guide

Setting up
Base unit
L Use only the supplied Panasonic AC adaptor PQLV219.
Press plug firmly.
"Click"
*For DSL/ADSL service users
Handset
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
L Use only the supplied
Panasonic AC adaptor
PQLV219.
Hook
"Click"
(120 V AC, 60 Hz)
"Click"
DSL/ADSL filter* (Not supplied)
Rechargeable Ni-MH ONLY
(120 V AC, 60 Hz)
KX-TG1061
Model No.
KX-TG1062
KX-TG1063
Correct
Base
unit
"Click"
Wrong
Base
unit
To single-line
telephone jack (RJ11C)
CHARGE FOR
ABOUT 7 HOURS
Confirm
"Charging" is
displayed.
PNQW1623ZA
DC1208SY0

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-TG1061

  • Page 1: Quick Guide

    TG106x_QG(e).fm Page 1 Friday, December 19, 2008 2:55 PM KX-TG1061 Model No. KX-TG1062 KX-TG1063 Quick Guide Setting up Base unit L Use only the supplied Panasonic AC adaptor PQLV219. Correct Press plug firmly. Base unit “Click” “Click” Wrong Hook Base unit “Click”...
  • Page 2: Operating Tips

    Enter the current month, date, and year. i {OK} Enter the current hour and minute (12-hour clock format). {AM/PM}: Select “AM” or “PM”. i {SAVE} i {OFF} For further information, visit http://www.panasonic.com/help or refer to operating instructions. – 2 –...
  • Page 3: Basic Operations

    Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C} Answering system (Base unit) Answering on/off Press {ANSWER ON} to turn on/off the answering system. Listening to messages For further information, visit http://www.panasonic.com/help or refer to operating instructions. – 3 –...
  • Page 4: Frequently Asked Questions

    L You can leave the handset on the charger anytime. This will not the time? harm the batteries. How can I answer a call waiting call L Press {CALL WAIT} when you hear the call waiting tone. (2nd call)? For further information, visit http://www.panasonic.com/help or refer to operating instructions. – 4 –...
  • Page 5: Quick Troubleshooting

    Remove the batteries for 10 seconds from the handset, and then insert the batteries into the handset again. “No link. Reconnect base AC adaptor.” is still displayed. Try to re-register the handset (page 7). Re-registration failed. Your telephone may need service. Please visit http://www.panasonic.com/help for further troubleshooting. – 5 –...
  • Page 6 Try to connect your Your telephone may telephone into a different previous page. need service when line. only back speaker provides a dial tone. Still displayed Your telephone may need service. Please visit http://www.panasonic.com/help for further troubleshooting. – 6 –...
  • Page 7: Registering A Handset To The Base Unit

    L The next step must be completed within 90 seconds. {LOCATOR} Handset Press Locator Press {OK}, then wait until a long beep sounds. on base 5sec then press OK {OK} For further registration information, visit http://www.panasonic.com/RegisterYourHandset – 7 –...
  • Page 8 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) Read FAQ in this Quick Guide and troubleshooting page in the Operating Instructions. Visit our web site: http://www.panasonic.com/help L Operating Instructions downloading, FAQ, and troubleshooting hints are available. Contact us via the web at: http://www.panasonic.com/contactinfo...

This manual is also suitable for:

Kx-tg1062Kx-tg1063

Table of Contents