Service Call Errors - Canon PIXMA iP6220D Service Manual

2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green
(Power LED), or Alarm LED Lit in Orange)
Cycles of blinking in
orange (Alarm LED) and
green (Power LED)
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
13 times
15 times
17 times
20 times
Continuous alternate
blinking
Lights in orange
*1: Before replacement of the logic board ass'y, check the waste ink amount, and re-set the waste ink amount value
in the replaced logic board.
[See Section 3-3. Adjustment / Settings, (6) Service mode, for details.]
*2: The main waste ink absorber is separate from the platen waste ink absorber. In servicing, replace the waste ink
absorber which becomes full.
[See Section 3-3. Adjustment / Settings, (6) Service mode, for details.]
*3: Reset the waste ink counter when replacing the bottom case unit. The main and platen waste ink counters can be
reset separately.
[See Section 3-3. Adjustment / Settings, (6) Service mode, for details.]
Error [Error code]
Carriage error [5100]
Paper feed error [6000]
Purge unit error [5C00]
ASF (cam) sensor error [5700]
Internal temperature error [5400]
Waste ink absorber full [5B00]
Cartridge temperature rise error [5200]
EEPROM error [6800]
Paper feed position error [6B00]
USB Host VBUS overcurrent [9000]
Motor driver error [6D00]
Other hardware error [6500]
ROM error
RAM error
(Replacement of listed parts, which are
- Carriage unit (QM2-3332)
- Timing slit strip film (QC1-6015)
- Logic board ass'y (QM2-2840)
- Carriage motor (QM2-2865)
- Timing sensor ass'y (QM2-2850)
- Timing slit disk film (QC1-4962)
- Feed roller ass'y (QL2-1284)
- Platen (QC1-7503)
- Logic board ass'y (QM2-2840)
- Paper feed motor (QM2-2866)
- Carriage unit (QM2-3332)
- Timing slit strip film (QC1-6015)
- Logic board ass'y (QM2-2840)
- Carriage motor (QM2-2865)
- Drive ass'y (QM2-3333)
- PE sensor ass'y (QM2-2855)
- Pressure roller ass'y (QM2-3337)
- Logic board ass'y (QM2-2840)
*2 Main waste ink absorber:
- Bottom case unit (QM2-3321)
- Ink absorber kit (QY5-0148)
Platen waste ink absorber:
- Ink absorber (QC1-6014)
- Ink absorber kit (QY5-0148)
- Print head
- Logic board ass'y (QM2-2840)
- Logic board ass'y (QM2-2840)
- Paper feed motor (QM2-2866)
- Logic board ass'y (QM2-2840)
- Logic board ass'y (QM2-2840)
- Logic board ass'y (QM2-2840)
- Logic board ass'y (QM2-2840)
- Logic board ass'y (QM2-2840)
- Logic board ass'y (QM2-2840)
1-6
Solution
likely to be faulty)
*1
*1
*1
*1
*3
*1
*1
*1
*1
*1
*1
*1
*1