Displaying File Information (Id3 Tag); Demo; Using Microphone; Using H/P Mode - LG CM9950 Owner's Manual

36 Operating
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.

DEMO

In the power off state, press JUKE BOX / DEMO on
the unit once. The unit will power on and display
the each of functions with demo sound in the
display window. To cancel the DEMO function,
press JUKE BOX / DEMO once more.
,
Note
3
y While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
y You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will
play back automatically.

Using Microphone

1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by rotating MIC VOL.
clockwise or counterclockwise on the unit.
,
Note
y When not using the microphone, set the
MIC VOL. to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
y If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL..
y If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOL. to minimum.

Using H/P MODE

Headphone monitoring is available.
Press H/P MODE to listen to music using
Headphone. Rotate H/P VOL. / SYNC SET to adjust
the volume.
When mixing, press H/P MODE to select a
monitoring mode. You can listen to the music
being mixed or playing in Source A or Source B.
,
Note
y It is not compatible with a 4 pole jack.
y If you select one source output in MIXER ON
mode, the playback effects (Except TEMPO)
are not applied to the output through the
headphone.
y If you power off or switch to MIXER OFF, the
selected H/P MODE is cancelled.

LIGHTING (X-FLASH) MODE

The function is to create a Club like atmosphere by
operating speaker lighting.
1. Press LIGHTING MODE on the unit.
The mode changes each time you press it :
OFF VOLCANO
PSYCHE CAOS OFF
,
Note
y Lighting function is available in all functions.
y Lighting mode retains its previous mode
when you first press LIGHTING MODE,
press again to change modes.
POLICE THUNDER