Pioneer DDJ-WEGO3 Operating Instructions Manual page 10

Installation procedure (Windows)
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [Serato DJ Support Information] and then click
the link to the Serato DJ Intro download page.
The Serato DJ Intro download page appears.
3 Log in to your "Serato.com" user account.
! If you have already registered a user account on "Serato.com", pro-
ceed to step 5.
! If you have not completed registering your user account, do so fol-
lowing the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters pro-
viding the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from "Serato.com".
! Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
! The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
4 Click the link in the e-mail message sent from "Serato.
com".
This takes you to the Serato DJ Intro download page. Proceed to step 6.
5 Log in.
Input the e-mail address and password you have registered to log in to
"Serato.com".
6 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.
7 Read the terms of the license agreement carefully,
and if you agree, select [I accept the agreement], then
click [Next].
! If you do not agree to the contents of the license agreement, click
[Cancel] to cancel installation.
Installation begins.
The message of successful installation appears once installation is
completed.
10
En
8 Click [Finish] to quit the Serato DJ Intro installer.
The installation is now complete.
Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is
completed.
! If any other programs are running on the computer, quit them.
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [Serato DJ Support Information] and then click
the link to the Serato DJ Intro download page.
The Serato DJ Intro download page appears.
3 Log in to your "Serato.com" user account.
! If you have already registered a user account on "Serato.com", pro-
ceed to step 5.
! If you have not completed registering your user account, do so fol-
lowing the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters pro-
viding the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from "Serato.com".
! Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
! The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
4 Click the link in the e-mail message sent from "Serato.
com".
This takes you to the Serato DJ Intro download page. Proceed to step 6.
5 Log in.
Input the e-mail address and password you have registered to log in to
"Serato.com".
6 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.