Using The Test Light - Motorola SCOUTTRAINER25 User Manual

3. To ensure that the Collar Contacts are securely fastened, fit the test light
over the Collar Contacts and twist clock-wise to tighten them securely as
shown below.
2.7

Using the Test Light

You can use the Test Light that is supplied with your Remote Training System to
test if the Remote Control Unit is sending static correction to the Pet Collar Unit.
1. Press and hold the POWER KEY
The Power LED will light up in green for 5 seconds.
2. Fit the Test Light Contacts over the Collar Contacts on the Pet Collar Unit.
Collar Contacts
3. Press and hold the STATIC CORRECTION KEY
Control Unit.
The Test Light will flash. The higher the level of static correction, the
brighter the Test Light flashes.
NOTE
If the Test Light does not flash, charge the Pet Collar Unit and re-test.
If the Test Light still does not flash, contact Customer Service at
1- 888-331-3383.
Getting Started
Twist clockwise to
tighten the Collar
Contacts securely.
on the Pet Collar Unit to power it on.
Test light
contacts
Test light
contacts
on the Remote
15