Pairing may take several seconds.
The green LED indicates the pairing status:
Pairing status for hearing instruments
flashing, then on for 5 seconds, then off
➧
Pairing is finished. An acoustic signal is played.
You can now use easyTek.
flashing for 10 minutes, then off
➧
Hearing instruments could not be paired.
Refer to section "Troubleshooting".
When pairing is finished, easyTek is ready...
... for remote control functions.
■
Refer to section "Remote control functions".
... for pairing Bluetooth devices as long as
■
the blue LED is flashing
Refer to section "Pairing Bluetooth devices".
If you want to pair Bluetooth devices not now
but later on, press
12
.
.