Panasonic DBS 576 Technical Manual page 51

System Feature
Hunt Groups
ISDN (Integrated Services Digital Network)
Maintenance
MCO Tenant Groups
Memory Backup
Multiple Ringing
MOH (Music-On-Hold)
Non-Blocking Architecture
Page Zones
PC Based Programming
Port/Channel Close ("Station Lockout")
Power Fail Transfer
Power-On Maintenance
Privacy
Private Networking (E&M)
Program Data Output
Recall Timers
Slide Ringing
Soft Key Operation
Speed Dialing (SSDs/PSDs)
Station Message Detail Recording (SMDR)
Station Name Assignment
System Fault Recording
System Speed Dial (SSD)
T-1 Networking
Tandem Connection
Telephone Programming
TRS (Toll Restriction Service)
Traffic Measurement
Trunk Groups
Trunk Name Assignment
Notes
Pilot No.; Circular/Distributed/Switchback/Terminal hunting;
Attendant Hunt Groups; Extension Hunt Groups
T-point/S-point BRI and PRI
local and remote
trunk groups can be assigned to different phone areas within
the same system, for outside-line access and incoming calls
on-site or via remote computer
the same trunk call ringing on multiple phones via DSS/BLF
keys, CO/MCO keys, and Directory Numbers (up to 3 PDNs
and 3 NPDNs per phone)
external and internal sources
all extensions/lines available for use at the same time
up to 5 external/10 internal page zones per system;
UNA calls over paging system (all or per-zone)
DBS 576 Manager (proprietary)
trunk/extension ports can be disabled for use
Up to 4 SLT phones can automatically receive dial tone from a
trunk line in the event of a power failure.
for extensions and trunks
includes Privacy Release
two or more PBXs in different locations, connected together in
a tie-line network
for maintenance/troubleshooting
system-wide or station-specific
delayed ringing for FF-key line appearances
(available on display phones only)
2-digit or 3-digit SSD codes (up to 80 or 800 per system);
2-digit PSD codes (up to 20 per phone)
includes abandoned calls
up to 10 characters each
Bus Monitor; storing/printout via programming
up to 800 SSDs per system; name assignments for display
phones; toll restriction override
T-1 point-to-point private networks (E&M)
E&M and T-1
(available on display phones only)
Outgoing calls can be allowed/blocked based on the path
(originating ext.-to-seized-trunk) and dialed digits.
trunk (separate inbound/outbound) and intercom call traffic;
30-minute interval storing/printout via programming
inbound and outbound; up to 99 groups per system; 96
members/cabinet in each group; MCO trunk group chaining
(available on display phones only)
Chapter 3 - System Features 51