Carrying power tools with your fi nger on the switch GENERAL POWER TOOL SAFETY or energising power tools that have the switch on WARNINGS invites accidents. d) Remove any adjusting key or wrench before WARNING turning the power tool on. Read all safety warnings and all instructions.
30 mA or less at all times is recommended. ** Tightening the bolt without extension cord at rated voltage. SYMBOLS NOTE Due to HITACHI’s continuing program of research and WARNING development, the specifi cations herein are subject to The following show symbols used for the machine. Be change without prior notice.
(Table 1) Table 1 NOTE Mode Indicator Lamp (3) Cause of Shutdown Due to HITACHI’s continuing program of research and (see Fig. 2) development, the specifi cations herein are subject to Fast repeated fl ashes Automatic shutdown change without prior notice.