Auto White Balance Adjustment - Sony DCR-TRV940 Adjustment Manual

DCR-TRV940/TRV940E/TRV950/TRV950E

12. Auto White Balance Adjustment

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility
will be poor.
Subject
Filter
Adjustment Page
Adjustment Address
Note 1: "Auto White Balance Adjustment" is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Note 2: Check that the data of page: 0, address: 10 is "00".
Note 3: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Switch setting
1) POWER .................................................................. CAMERA
2) DIGITAL ZOOM (Menu setting) .................................... OFF
3) STEADY SHOT (Menu setting) ..................................... OFF
Adjusting method:
Order Page Address Data
1
2 0 01
3 6 01
4 6 01
5 6 02
Note 4: The adjustment data will be automatically input to page:
F, address: 40 to 43.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01
2 0 01
3
RadarW RadarW RadarW
RadarW RadarW
Clear chart
(Color reproduction adjustment
frame)
Filter C14 for color temperature
correction
F
40 to 43
Procedure
Place the C14 filter on the
lens.
01
83 Press PAUSE button.
81 Press PAUSE button. (Note 4)
Check the data changes to
"01".
Procedure
00 Press PAUSE button.
00
Remove the C14 filter on the
lens.
6-32