Samsung 450 Series Installation Manual page 43

HD450
y Local Set OSD
– Initially highlighted: BRA_DTV
– If you press the Enter key after selecting Change, you can change the country.If the country is changed, the TV
automatically turns off and on.
– If you select the incorrect country, execute Factory Reset again after entering the Factory menu.
– If you don`t want to change the country, select skip.
y Easy Set Up OSD
– Initially highlighted: Standalone Setup
– If you select the Standalone Only button, Standalone hospital mode is set by default and the "Standalone mode has
been set" OSD appears for 3 seconds.
– TV enters into RF mode automatically after displaying the "Standalone mode has been set" OSD for 3seconds.
– If you select Standalone Setup mode, the "Select your Language" OSD appears.
y Select your Language OSD
– Initially highlighted: Português
– Display time: OSD time out and operation are the same as Samsung's consumer TV models.
– If you press the Enter key, the "Configure your TV" OSD appears.
y Configure your TV OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode.
y Auto Program Mode OSD
– If you press the Enter key, the TV automatically searches for channels.
y Set Clock Mode and Time Zone OSD
– Initially highlighted: Clock Mode : Auto, Time Zone :South and Southeast
– If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
– If the TV will not be tuned to digital broadcast channels,set the Clock Mode to Manual, and then set the date and
time on the TV manually.
– Select your time zone on the map appears.
43
English