Displaying A Feeder Error Message Prompt - Canon ImageRunner 2545i Reference Manual

Displaying a Feeder Error Message Prompt

If the feeder is not clean, the machine may scan and print dust and grime on the
output. You can set the machine to prompt you to clean the scanning area when the
machine detects streaks or stains.
IMPORTANT
This mode is available only when the machine is equipped with the feeder (optional for
the imageRUNNER 2545/2535/2530/2525/2520).
NOTE
• The feeder error message prompt appears when originals are placed in the feeder.
• The default setting is 'On'.
1
Press
For help, see steps 1 and 2 in "Initial Function at Power ON," on p. 3-2.
2
3
4
Press
(Additional Functions) ➞ [Common Settings].
(Reset) to return to the top screen.
Press [ ] or [ ] until
[Error Display for Dirty Feeder]
appears ➞ press
[Error Display for Dirty Feeder].
Press [On] or [Off] to enable or
disable the feeder error message
prompt ➞ press [OK].
The selected mode is set.
Specifying Common Settings
3
3-27