Error Code - Pioneer CDJ-2000 Service Manual

1

7. ERROR CODE

Newly Added Error Code
A
Error
Display word
Code
E-8302 PLAYER ERROR (XXXX)
[Detailed information on E-8302, newly added error code]
E-8302: PLAYER ERROR ( x x x x )
E1: Data on the track in which an error was generated
B
E2: Processing status when an error was generated
C
E3 and E4: Detailed description of the error code
D
E
F
28
1
2
Contents
Abnormalities occurred during playback.
Newly added detailed information
E1 E2 E3 E4
First 1 bit 0: Local; 1: Via the link
Remaining 3 bits 0: CDDA; 1: CD-ROM, DVD-ROM; 2: Memory card; 3: USB storage; 4: PC; 5: MIXER
Four-bit code to identify in which process of the program the error was generated
When a CDDA is played
1 In the process of normal filling in the forward direction
2 In the process of normal filling in the reverse direction
3 In the process of prereading wave data
Note: Currently, although prereading of wave data can be interrupted by an error, playback itself will not be
interrupted by the error. Therefore, an E-8302 error will not be generated, and this code will not be displayed.
4 In the process of filling for forward scanning
5 In the process of filling for reverse scanning
0 In other process
When a file is played
1 In the process of normal filling in the forward direction
2 In the process of normal filling in the reverse direction
3 In the process of prereading wave data
Note: Currently, although prereading of wave data can be interrupted by an error, playback itself will not be
interrupted by the error. Therefore, an E-8302 error will not be generated, and this code will not be displayed.
4 In the process of filling for forward scanning
5 In the process of filling for reverse scanning
6 When a file is opened
7 When file data are obtained
0 In other process
First 1 bit Additional track data 0: Uncompressed data; 1: Compressed data
Remaining 7 bits Detailed description of the error code
01–0F: DSP system error
02 Timeout of a file/track change command to the DSP
03 Timeout of a filling command to the DSP
04 Timeout of an audio data transmission command to the DSP
05 Filling command error
A filling command failed, because the deleted data amount from the buffer was smaller than the requested
amount of a buffer-data deletion command.
06 Filling command error
A filling continuation command cannot be executed, because the previous filling process was interrupted.
07 Filling command error
An unknown error code was received.
08 A filling command was interrupted.
(An interruption request and CUE search)
10–2F: Reading system error
When a CDDA is played Note: These error codes will be displayed after all retry and recovery attempts failed.
11 Interpolation of a destroyed subcode failed.
12 The address of the retrieved data was different from the requested one.
13 An error was returned from the drive module (ATAPI).
When a file is played
10 - 19 File system error
11 File open error
14 File read error
15 File write error
30–37: DB system error
38–7F: Other errors
70 Unexpected error in the process of OS function execution
2
3
CDJ-2000
3
4
Note
4