VHF DIGITAL TRANSCEIVER
NX-200
SERVICE MANUAL
REVISED
This service manual has been revised due to the modifi cation of the PC board. Refer to "Service Manual List" on page 2 for the product serial
number corresponding to each PC board (Control, TX-RX). Refer to the NX-200 service manual (B51-8810-00) for any information which has
not been covered in this NX-200 service manual.
NX-200 K2
Knob (Selector)
(K29-9408-13)
Knob (Volume)
(K29-9407-03)
Badge
(B43-1606-04)
Knob (PTT)
(K29-9405-03)
(G53-1766-11)
Plastic cabinet assy
(18 key)
(A02-4003-23)
Does not come with antenna. Antenna is available
as an option.
General ................................................................... 2
System Set-Up ....................................................... 3
Realignment ......................................................... 3
Installation .......................................................... 6
Parts List ............................................................. 20
Exploded View .................................................... 31
PACKING .................................................................. 32
Adjustment ........................................................ 36
This product complies with the
RoHS
Helical Antenna
(KRA-22: option)
CONTENTS
directive for the European market.
© 2009-1 PRINTED IN JA PAN
B51-8810-10 ( N ) 645
NX-200 K
Block Diagram .................................................. 90
Level Diagram ................................................... 94
Knob (Selector)
(K29-9408-13)
Knob (Volume)
(K29-9407-03)
Badge
(B43-1606-04)
Knob (PTT)
(K29-9405-03)
Packing (6 key)
(G53-1765-11)
Plastic cabinet assy
(6 key)
(A02-4002-23)
This product uses Lead Free solder.