Sync; Blc - Siemens CCWC1335-LP Instruction Manual

7.2.8

SYNC

7.2.9

BLC

Siemens Building Technologies
Fire Safety & Security Products
Using the LEFT/ RIGHT button, set the gain to NORMAL, TURBO or OFF.
NORMAL Standard position, GAIN=24dB.
TURBO High-sensitivity position, GAIN=30dB.
OFF
Minimum gain. If this is selected, D/N mode (AUTO) is disabled.
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
Fig. 8 SYNC
Move the cursor to the position shown in Fig. 8.
Use the LEFT/ RIGHT button to choose INT or LL. The LL function is available only
for camera models supplied with AC power.
INT The camera is in the internal SYNC mode.
LL The camera is in the line lock mode; you can adjust the phase angle from 0 ~ 300°
accordingly. The default is 0° .
NOTE:
For DC power models, the SYNC will be set automatically to INT mode.
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
Fig. 9 BLC
This function is for selecting the backlight mode (OFF, BLC1, BLC2, BLC3, BLC4,
BLC5, BLC6)
Move the cursor to the position shown in Fig. 9.
Installing the Camera
19
03.2005