Auto Reconnect; Beep On Auto Reconnect; Idle State Options - Siemens optiPoint 410 User Manual

Step by Step
>

34=Auto Reconnect?

Switch on?
>
35=Auto Reconnect Beep?>
Switch on?
>
36=Idle display static?
1=Cycle/Flash?
>
2=Static?
Auto Reconnect
You can use this option to activate and deactivate the
options for placing a call on hold and for retrieving it
again using both a CTI application and the telephone.
This menu option is only available if it has been
activated by the administrator.
If you have a multiline telephone, this function is
only available for the prime line.
Prerequisite: You are in the "Configuration" menu
page 62.
:
Select and confirm.
>
:
Confirm. The new setting is displayed.
>

Beep on Auto Reconnect

You can use this option to specify whether you will hear
a beep when a call is automatically reconnected.
Prerequisite: You are in the "Configuration" menu
page 62.
:
Select and confirm.
:
Confirm. The new setting is displayed.
>

Idle State Options

System messages are displayed in the fourth line of the
optiPoint 410/420 economy/economy plus/standard S
V6.0.
Prerequisite: You are in the "Configuration" menu
page 62.
:
Select and confirm.
>
:
Confirm. If multiple messages are received, they are
>
displayed alternately.
or
:
Select and confirm. The message with the highest pri-
>
ority is displayed even if multiple messages have been
received. If there are several messages, a plus sign is
visible behind the current message. You can switch be-
tween messages using the plus/minus key.
Customizing the Telephone
75