Use the
VPN
screen to add and remove VPN tunnels. To configure an existing VPN tunnel, select it
from the list in the
VPN Tunnels
Config
field.
To configure a VPN tunnel on the access point:
1. Select
Network Configuration
2. Use the
VPN Tunnels
tunnel network address information and display key exchange information for each tunnel.
Add
Del
field. The selected tunnel's configuration displays in a
->
WAN
->
field to add or delete a tunnel to the list of available tunnels, list
Click
Add
to add a VPN tunnel to the list. To configure a specific
tunnel, select it from the list and use the parameters within the
VPN Tunnel Config
field to set its properties.
Click
Del
to delete a highlighted VPN tunnel. There is no
confirmation before deleting the tunnel.
Configuring Access Point Security
VPN
from the access point menu tree.
6-35
VPN Tunnel